|
The P-20 Energy Saving Device that we offer is capable of saving 20% to 25% lighting energy. The device can also control the acute failure of lighting components such as bulbs, tubes, chokes, etc., due to high voltage. The device is easy to install and its expected life is more than 20 years. The P-20 unit can be installed either in series to the lighting mains or DB wise.
The device starts paying back in terms of energy savings within 7 months from the date of installation. The particular length of the payback period is dependent on the usage of lighting, the working hours of the plant and electricity tariff.
Technical specification
Technical specification for the P-20 Energy Saving Devices are listed below :-
- 240V, 50 HZ single phase system ranging from 1.5 KVA to 50.0 KVA
- 415V, 50 HZ three phase system ranging from 4.5 KVA to 660.0 KVA ( 3 phase 4 wire system)
- P-20 are indoor floor mounted (outdoor - optional)
- Robust construction with high quality powder coated finish
- Manual tap selector cum Bybass facility (saving selector
- MCB/MCCB in the incoming side for all the standard devices
- Voltmeter and Ammeter (analog) with selector switches
- Forced ventilation for higher capacity devices
- Phase indication lamps (LED type)
- Provisions for incoming and outgoing cable entry
Optional Accessories
We offer a range of optional accessories which are available only with our product and are not sold individually, which are listed below:
- Digital Voltmeter
- Digital Ammeter
- Energy Meter
- Power Monitor
- Auto Bypass
- Auto Tap Changer
|
